Samsung Galaxy A Charging Port Board Replacement: A35, A36, A55, A56 and More
Share
On current Galaxy A phones, the USB-C port isn't soldered to the mainboard. It sits on a small sub-board at the bottom of the phone, joined to the mainboard by a flex cable. That makes a charging port repair a straightforward board swap, and on most models the same board also carries the main microphone.
Is it really the charging board?
The usual signs of a worn or damaged board:
- Not charging, or charging only when the cable is held at an angle
- Slow charging, or fast charging no longer showing
- A Moisture detected warning that won't clear
- Callers can't hear the customer, but video recordings have sound
- The phone isn't recognised by a computer
Rule out the easy causes first. Samsung's own checklist:
- Try a different charger and cable. Super Fast Charging needs a matching adapter (25W, or 45W with a 5A cable on models that support it).
- Check that Fast charging is on and battery protection isn't limiting the charge (Settings → Battery → Charging settings).
- Power the phone off and inspect the port with a torch. Lint packed into the port is common. Don't use metal tools or liquids.
- Run Samsung Members → Diagnostics → Cable charging.
- If the warning is Moisture detected, let the phone dry first. Samsung says moisture normally evaporates within one to two hours.
When a new board won't fix it
If the phone still won't charge with a known-good board fitted, the fault may be in the charging circuit on the mainboard, for example a failed protection chip after a bad charger. Swap the board as a test before quoting it as the fix.
What's on the board, by model
| Model | Back cover | On the board besides USB-C |
|---|---|---|
| A15 4G / 5G | Plastic, glued | Antenna connections |
| A16 5G | Plastic, clipped | Microphone |
| A25 5G | Plastic, glued | Microphone, 3.5mm headphone jack |
| A34 5G | Plastic, glued | Microphone |
| A35 5G | Glass, glued | Microphone, loudspeaker contacts |
| A36 5G | Glass, glued | Microphone, SIM tray connector |
| A54 5G | Glass, glued | Microphone |
| A55 5G | Glass, glued | Microphone |
| A56 5G | Glass, glued | Microphone, SIM card reader |
Because the microphone is on the board, a board swap often fixes "they can't hear me on calls" complaints at the same time. Test both after the repair.
The replacement route
All of these models are opened from the back. You don't need to remove the screen.
Match the model code
Galaxy A phones are built in several regional versions, and the boards aren't always the same. Samsung's US-model boards for the A35 and A16 5G, for example, carry different part numbers from the international ones. Check the full model code in Settings → About phone and match it to the product title.
Australian models we see most often: A35 SM-A356E, A55 SM-A556E, A56 SM-A566B, A16 5G SM-A166P. If your model code isn't listed in a product title, send it to us and we'll confirm the right board.
Original or aftermarket?
Listings marked [Original] are genuine Samsung boards. Aftermarket boards cost less but can vary, most often in fast charging support. Whichever you fit, confirm the phone shows fast charging with a suitable charger before it goes back to the customer.
Charging port boards in stock
- Galaxy A15 4G / 5G
- Galaxy A16 5G (A166P) · A16 5G (A166B) · A16 4G
- Galaxy A17 4G · A17 5G
- Galaxy A25 5G
- Galaxy A34 5G · A54 5G
- Galaxy A35 5G · A55 5G
- Galaxy A36 5G · A56 5G
Order before 5pm on a weekday for same-day pickup at our Coopers Plains trade counter, or use our after-hours locker. Browse all Galaxy A parts.
Questions about a specific model? Call 04 7888 7212 or email [email protected].